|
| 形狀 | SMD |
|---|---|
| 尺寸代碼(單位為mm) | 1210 |
| 長度 | 1.25mm |
| 長度公差 | ±0.1mm |
| 寬度 | 1.0mm |
| 寬度公差 | ±0.1mm |
| 厚度 | 0.5mm |
| 厚度公差 | ±0.1mm |
| 共模阻抗(at 100MHz) | 45Ω |
| 共膜抗阻(at 100MHz)公差 | ±25% |
| 額定電流 | 100mA |
| 額定電壓 | 5Vdc |
| 耐電壓 | 12.5Vdc |
| 直流電阻(max) | 1Ω |
| 直流電阻 | 0.8Ω±25% |
| 絕緣電阻(min.) | 100MΩ |
| 工作溫度范圍 | -40℃ to 85℃ |
| 質量(標準值) | 0.002g |
| 電路數目 | 1 |
| 工作溫度范圍(含自身溫度上升) | No |
特點
1. Small size and tight dimension.
(L×W =1.25×1.0mm T= 0.5+/-0.1mm)
2. Low Rdc.
3. High magnetic coupling factor (k>=0.98) enables
effective noise suppression without damaging to high
speed differential signal waveform.
4. Designed to match line impedance(90Ω) such as USB.
5. Lower DC resistance than conventional film type
common mode choke coil enables lower damping to
waveform.
Applications
Common mode noise suppression for high speed
differential signal lines(ex.USB2.0) in compact mobile
equipments such as digital cameras, note PCs and mobile
phones.
用途
| 其他用途 |
For general |
|---|
包裝信息
| 包裝 | 規格 | 超小訂購單位 |
|---|---|---|
B | 散裝袋 | 500 |
L | 180mm壓紋帶 | 4000 |
