|
| 形狀 | SMD |
|---|---|
| 尺寸代碼(單位為mm) | 0806 |
| 長度 | 0.85mm |
| 長度公差 | ±0.05mm |
| 寬度 | 0.65mm |
| 寬度公差 | ±0.05mm |
| 厚度 | 0.45mm |
| 厚度公差 | ±0.05mm |
| 共模阻抗(at 100MHz) | 28Ω |
| 共膜抗阻(at 100MHz)公差 | ±20% |
| 額定電流 | 100mA |
| 額定電壓 | 5Vdc |
| 耐電壓 | 12.5Vdc |
| 直流電阻(max) | 1.63Ω |
| 直流電阻 | 1.3Ω±25% |
| 絕緣電阻(min.) | 100MΩ |
| 工作溫度范圍 | -40℃ to 85℃ |
| 質(zhì)量(標準值) | 0.001g |
| 電路數(shù)目 | 1 |
| 工作溫度范圍(含自身溫度上升) | No |
特點
1. Small size and tight dimensional tolerance
Size:0.85x0.65x0.45mm
Tolerance:+-0.05mm
2. High common mode impedance up to 120ohm (at 100MHz)
is available.
3. DLP0NS series enables noise suppression for
differential signal line without distortion in high-
speed signal transmission due to its line impedance
matching.
4. High Cut-off Frequency.（DLP0NSA150HL2：8GHz typ.）
■Application
Common mode noise suppression of high
speed differential signal lines for USB 2.0, IEEE1394,
LVDS etc.
1. Note PCs
2. Cellular phones
3. Digital Still Cameras, Digital Video Cameras
4. Designed to match signal line characteristic impedance
※DLP0NSC280HL2/DLP0NSC900HL2 is designed to meet mipi D-phy.
※DLP0NSA150HL2 is designed to meet Display Port.
※DLP0NSA070HL2 is designed to meet SI requirement of SATA.
用途
| 其他用途 |
For general |
|---|
包裝信息
| 包裝 | 規(guī)格 | 超小訂購單位 |
|---|---|---|
L | 180mm壓紋帶 | 10000 |
B | 散裝袋 | 500 |
